---

• 
• 
• 
• 
• 

유연성 있는 작업이 필요할때는~~

모든 것이 준비된 장비를 찾고 있다면 Mobile Flexx II 일 것입니다.
저희 제품 중 하나인 Unixx III 또는 T-BaseV3 에 포함된 워크 스테니션으로서의 모든 기능을 Mobile Flexx II 에서 구비하고 있으며, 작업시 레이저 및 모든 움직임을 위한 동기화를 통해 마이크로 프로세서 제어가 가능합니다. Teach in, 마킹 및 3- PCD 기능 또한 이 장비에 포함되어 있습니다.

다른 모든 저희 워크 스테이션 장비와 마찬가지로 4축은 고정밀 로테이션 스테이지 또는 심지어 와이어 피더 (wire feeder).와도 같이 사용할 수 있도록 업그레이드 할 수 있습니다.

강력한 플랫폼과 함께 장거리 X축 구동이 가능하여 크기 2000 x 2000 mm의 금형 작업에도 사용할 수 있습니다.
따라서 작업장 내 작업 테이블 위에서 작업할 경우 또는 작업장 외의 대형 금형에서 직접 작업을 위해 사용하든 전혀 문제가 될 것이 없습니다.
– 모바일 Flexx II는 완벽한 업무 처리를 위한 전문 솔루션 일 것입니다.

• 
  ×Close

  Teach in

  

  Enables the handling of complicated geometries in four axis without complex programming. A small number of support points are hit once on the contour of the work piece in advance. The user can subsequently move the programmed welding line forward and backwards using the joystick and can also shift its position by offsetting the start point.

  Close
• 
  ×Close

  Schutzgas

  

  Programmable shielding gas post-flooding

  In order to eliminate the oxidation of the welded joint directly after it has been welded, the times during which the shielding gas ist still conducted on the welded joint following the welding can be individually set.

  Close
• 
  ×Close

  pulse distance synchronization

  

  Provides a constant pulse overlapping through the dynamic synchronization of the pulse trigger with the axis movement. PDS ensures replicable welding results with different speeds and consistent, homogenous weld joints in all movement situations. Therefore, a higher operating speed can be reached.

  Close
• 
  ×Close

  on axis light

  

  This allows you to see into deep crevices or holes which would be in darkness if lateral illumination were used. The illumination comes alongside the optical beam and always illuminates accurately from above.

  Close
• 
  ×Close

  On axis gas

  On-axis shielding gas supply

  

  A reliable on-axis shielding gas supply enables perfect welding even with highly-sensitive materials, such as titanium, for example.

  The welded joint is always flooded with shielding gas under 90 degrees. This prevents the sort of shadow effects and swirling which occurs when a lateral gas supply is used.

  Close
• 
  ×Close

  FSS 300

  Close
• 
  ×Close

  FSS 150

  Close
• 
  ×Close

  Rotation Axis

  

  Specially developed turning units increase the user value of your workstation. They incorporate all functions of CAN-Step control, available at the touch of a button, including pulse synchronization and „Teach in“ programming.

  Additional features: • Swivel-mounted • Free implementation up to Ø40 mm • different chuck types, chucking range up to Ø 160 mm.

  Close
• 
  ×Close

  Display

  Large display with backlighting

  

  The large backlit display provides the user with a direct view of all the important operating parameters. Adjustment limits are visualized.

  The adjustment of the parameters themselves takes place via the work chamber´s control elements.

  Close
• 
  ×Close

  Can Step

  

  Precisely controls axis movements. This extends manual welding by its sophisticated automatic and programable functions. Touchscreen and Joystick terminals directly in your workspace provide a unique, simple control concept. Thanks to the completely integrated hardware, a separate computer is not needed.

   

  Close
• 
  ×Close

  3Point

  

  You can process circular type contours by using the PCD function with the XY axis. The circular path is precisely defined through the teaching of only three support points. You do not need to know the center or the diameter; the position on the work piece is optional. You can move along the programmed course either forward or backward by using the joystick.

  Close

Specification

• 150W
  FSS
• 300W
  FSS
• FSS
  450W